EVS IPDirector Version 5.8 - July 2010 Part 3 User's Manual - Manual (Page 21)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 3 – Browsing
EVS Broadcast Equipment – July 2010
10
Option Description
Transfer
Monitoring Transfer monitoring is explained in section ‘Transfer
Monitoring’ on page 52.
Available for administrators and users with appropriate user
rights.
My transfer only When enabled, this option will make sure that you can only
see the transfers that you initiated.
Clip element
association Enables to manually associate a clip element to an existing
clip with matching TC. See procedure hereafter.
How to Manually Associate a Clip Element to an Existing Clip
To manually associate a clip element and an existing clip with matching TC,
proceed as follows:
1. In the Database Explorer grid, select a clip.
2. In the Database Explorer Tools menu, select Clip Element Association.
The Clip Element Association window opens.
3. Drag the clip line on the Name field of the Clip Element Association window.
Fields are automatically filled with clip information.
4. In the Database Explorer grid, select a clip element.
5. Drag the clip element line on the right pane of the Clip Element Association
window.
The association is created.
Note
Both LTC and USER TC must match for the association to be accepted.
2.3.6 A
SSIGN
B
UTTON
The Assign button is used to assign keywords to one or several clips. It can be
activated in Clip, Clip element or bins/clips branches of the Database Explorer.