EVS IPDirector Version 5.8 - July 2010 Part 3 User's Manual - Manual (Page 128)

IPDirector Version 5.8 – User Manual – Part 3: Browsing
EVS Broadcast Equipment – July 2010
Issue 5.8.B
117
12.3.1 H
OW TO
L
OAD AND
I
MMEDIATELY
P
LAY AN
E
LEMENT
To play the element on the channel associated to the Database explorer, proceed
as follows:
1. Assign a channel to the Database Explorer as explained in section 12.1
‘How to Assign a Player Channel to the Database Explorer’ on page 114.
2. Click the Play button to activate the Play mode.
The button turns orange.
3. Click an element line in the database explorer grid.
The element immediately played out on the channel associated to the
Database Explorer.
The corresponding element line in the database explorer grid is highlighted
in dark green.
To play the element on the channel associated to a control panel, proceed as
follows:
1. In the Database Explorer, select the line corresponding to the element you
want to be played out.
2. Press CTRL key and, still holding it, drag the element line to the Control
Panel.
The element is immediately played out on the channel associated to the
Control Panel.
Note
The Play mode is not recommended when selecting elements to play for
live transmission as there will be a delay between the loading of the
element and the playout.