3d/1080p slsm configurations, Assignment principles, Xt2+ 6u servers – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 82: Available slsm 2x configurations

3.2.7.
3D/1080p SLSM Configurations
Assignment Principles
The combination of 3D or 1080p standards and SLSM configurations associates the
following individual rules for connector assignments on the rear panel:
•
For 3D or 1080p in Dual Link with V3X boards, the primary link of a codec module is
used for the first connector, and the secondary link for the same codec module is used
for the second connector.
•
For 3D or 1080p in 3G (single link), only with V3X boards, the primary link of the codec
module is used for the single connector. However, both primary and secondary links
of a codec module of the V3X board are used.
•
For the SLSM 2 Phase configurations, one SLSM recorder accounts for one logical
channel, but corresponds to two physical channels. This means that the primary
connectors of two codec modules will be used for one SLSM 2 Phase recorder.
•
For the SLSM 3 Phase configurations, one SLSM recorder accounts for one logical
channel, but corresponds to three physical channels. This means that the primary
connectors of three codec modules will be used for one SLSM 3 Phase recorder.
XT2+ 6U Servers
Note
The 3D/1080p SLSM configurations are only supported on an XT2+ server fitted
with V3X boards.
Available SLSM 2x Configurations
The tables below show the available 3D and 1080p configurations with SLSM 2 Phase
cameras on a XT2+ 6U server. They show the link assignment at the level of the codec
module of a V3X board.
IN6/OUT1
IN5/OUT2
IN4/OUT3
IN3/OUT4
IN2/OUT5
IN1/OUT6
#REC
SLSM
2x
#REC
#PLAY
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
1
0
0
REC
1,2A
REC
1,2B
REC
1,1A
REC
1,1B
1
1
0
REC
2A
REC
2B
REC
1,2A
REC
1,2B
REC
1,1A
REC
1,1B
1
2
0
REC
3A
REC
3B
REC
2A
REC
2B
REC
1,2A
REC
1,2B
REC
1,1A
REC
1,1B
2
0
0
REC
2,2A
REC
2,2B
REC
2,1A
REC
2,1B
REC
1,2A
REC
1,2B
REC
1,1A
REC
1,1B
XT2+ Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
72