EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 199)

Audio locked to video
Availability This setting is only available if the license code 112 is valid.
Description Specifies whether you will be able to define different durations
for the audio and video transitions inside a playlist when the
Advanced Audio Editing parameter is enabled.
This setting is irrelevant if the Advanced Audio Editing
parameter is disabled.
Values The possible values are:
• Yes: The duration of video and audio transitions in a
playlist cannot be different.
• No: The duration of the video and audio transitions in a
playlist can be different.
If the license code 112 for advanced audio editing is not valid,
the parameter value is forced to 'Yes'.
Default value Yes
Audio effect duration
Availability This setting is only available if the license code 112 is valid.
This setting is only available if the Audio locked to video
setting is set to 'No'.
Description Sets the duration of the audio transition effect when:
• the Advanced Audio Editing setting is enabled.
• the Audio locked to video setting is set to 'No'.
The specified value is used as default value in Playlist Edit
mode.
If the Advanced Audio Editing is disabled, this setting is not
relevant since the video and audio transitions will always have
the same duration, based on the Video Effect Duration.
Values 0s00fr to 20s00fr
Default value 0s00fr
Wipe type
Description Specifies the vertical wipe effects from Left to Right or from
Right to Left.
Values Vert. L>R / Vert. R>L
Default value Vert. L > R
189 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B