EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 69)

3.2.2. SD/HD Base Configurations
Introduction
The tables below show the available SD/HD configurations with an XT2+ 6U server, and
how the BNC connectors should be cabled.
The option 'mix on one channel' is only available with an XT2+ server equipped with V3X
boards.
Note
When the option 'mix on one channel' is activated on a play channel (Channels
tab, page 7), the secondary link of the codec module (J3 on V3X board) of the
play channel is used to play transition effects.
XT2+ 6U Servers
Available Standard Configurations
Note
The option 'mix on one channel' is only availble on an XT2+ server equipped with
V3X boards, but not necessarily in all configurations.
IN6/OUT1 IN5/OUT2 IN4/OUT3 IN3/OUT4 IN2/OUT5 IN1/OUT6
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 REC1
2 0 REC2 REC1
3 0 REC3 REC2 REC1
4 0 REC4 REC3 REC2 REC1
5 0 REC5 REC4 REC3 REC2 REC1
6 0 REC6 REC5 REC4 REC3 REC2 REC1
0 1 PLAY1 MIX1
1 1 PLAY1 MIX1 REC1
2 1 PLAY1 MIX1 REC2 REC1
3 1 PLAY1 MIX1 REC3 REC2 REC1
4 1 PLAY1 MIX1 REC 4 REC3 REC2 REC1
5 1 PLAY1 MIX1 REC5 REC 4 REC3 REC2 REC1
0 2 PLAY1 MIX1 PLAY2 MIX2
59 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B