EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 152)

Setting Name Basic & Advanced
Technical
Setup
J1 X X
OUT B J3 X X
Aspect ratio X X
SD Edge Enh. X X
REC HD->SD Low latency X X
3.6.2. Multiviewer Settings
Introduction
The Multiviewer settings allow specifying the settings related to the Multiviewer display
such as the number of channels to combine and display, the audio and output video
configuration.
These fields are available in the Multicam Configuration window, Monitoring tab .
Note
The Multiviewer settings will only be displayed if a Multiviewer board is present
on the EVS server.
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the Multiviewer settings area.
XT2+ Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 142