EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 174)

Name V-Pos
Description Defines the vertical position of the edit name on the screen.
Values 0 to 11
Default value 0
3.7.6. RS422 VarID Settings
Introduction
The RS422 VarID settings and the VDCP visibility settings display the read-only VarID
settings.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Protocol tab, on page 4 in the advanced display
mode in the server- and web-based interfaces.
Warning
The VDCP visibility settings are only available if the license code 119, required
to work with the VDCP protocol, is valid.
The following screenshot shows the RS422 VarID and the VDCP visibility settings areas,
available in the Protocol tab, in advanced mode:
XT2+ Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 164