EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 52)

2.5.6. Importing and Exporting Keyword Files
Introduction
The keyword file is a simple text file with a name of 8 characters and a .KWD extension.
All keyword files must be stored in the C:\LSMCE\DATA\KWD directory of the server. A
sample keyword file (SAMPLE.KWD) is provided by EVS when Multicam is installed.
You can also import and export keyword files to and from the EVS server via a USB key.
You can only perform this action in the server-based application.
How to Import a Keyword File
To import a keyword file, proceed as follows:
1. Save the keyword file you want to import on a USB key, and plug it into the USB port
of the EVS server as the Multicam Setup window is open.
2. In the Multicam Setup window, press K to call the Import/export keyword file
command.
The following dialog box opens:
3. If several keyword files are stored on the USB key, press SPACEBAR until the
requested file is selected on the left field.
4. Press ENTER to import the keyword file from the USB key to the EVS server.
5. Press OK to close the message box that appears when the keyword file has been
imported.
6. Remove the USB key.
How to Export a Keyword File
To export a keyword file, proceed as follows:
1. Plug a USB key into the USB port of the EVS server as the Multicam Setup window is
open.
2. In the Multicam Setup window, press K to call the Import/export keyword file
command.
The following dialog box opens:
XT2+ Server - Version 11.01 - Configuration Manual
2. Multicam Setup 42