EVS XT3 Version 11.01 - November 2012 Configuration Manual - Manual (Page 84)

IN6/OUT1 IN5/OUT2 IN4/OUT3 IN3/OUT4 IN2/OUT5 IN1/OUT6
#REC
SLSM
2x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
3 0 2 PLAY
1 MIX
1 PLAY
2 MIX
2 REC
2,2 REC
2,1 REC
1,2 REC
3,2 REC
1,1 REC
3,1
1 2 4 PLAY
1 MIX
1 PLAY
2 MIX
2 PLAY
3 MIX
3 PLAY
4 MIX
4 REC
1,2 REC
3 REC
1,1 REC
2
2 0 4 PLAY
1 MIX
1 PLAY
2 MIX
2 PLAY
3 MIX
3 PLAY
4 MIX
4 REC
1,2 REC
2,2 REC
1,1 REC
2,1
Example: 2xSLSM 2PH + 2 REC + 2 PLAY MIX (2R/CM)
The BNC connectors to be used as record and play channels in an SLSM configuration
with 2xSLSM 2PH + 2REC + 2PLAY MIX in 2R/CM mode need to be cabled as shown
below:
Example: 3xSLSM 2PH + 2 PLAY MIX (2R/CM)
The BNC connectors to be used as record and play channels in an SLSM configuration
with 3xSLSM 2PH + 2 PLAY MIX in 2R/CM mode need to be cabled as shown below:
Available Configurations with 3G SLSM 2-Phase Cameras
The table below shows the available 3G SLSM 2 Phase configurations in HD with an XT3
6U server, and how the BNC connectors should be cabled:
XT3 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 74