EVS XT3 Version 11.01 - November 2012 Configuration Manual - Manual (Page 80)

Example: 1x3G SLSM 2PH + 1REC + 1PLAY
The BNC connectors to be used as record and play channels in a 3G SLSM configuration
with 1x3G SLSM 2PH + 1 REC + 1 PLAY need to be cabled as shown below.
On the codec module of the V3X board used for the 3G SLSM REC, both primary and
secondary links are used.
Example: 3x3G SLSM 2PH + 1PLAY (2R/CM)
The BNC connectors to be used as record and play channels in a 3G SLSM configuration
with 3x3G SLSM 2PH + 1PLAY in 2R/CM mode need to be cabled as shown below:
XT3 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 70