EVS XT3 Version 11.01 - November 2012 Configuration Manual - Manual (Page 175)

Network error
Description Enables or disables the network error information display on
the output monitor.
If there is an problem with the network connection, the !Net
message appears on the output monitor. When the network is
available again, the system will try to reconnect and the →Net
message appears on the output monitor.
Values Yes (default) / No
Clip name
Description Specifies how the clip name is displayed.
Values VarID / Name
Default Name
3.6.4. Downconverted Outputs Settings
Introduction
The Downconverted outputs settings allow specifying the settings related to the
downconverted output lines and the downconverter parameters.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Monitoring tab.
• in the Technical menu of the Remote Control Panel (T4.2).
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the Downconverted outputs settings area.
165 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B