EVS XT3 Version 11.01 - November 2012 Configuration Manual - Manual (Page 82)

Available U-Motion 6-Phase Configurations
The table below shows the available U-Motion 6 Phase configurations in HD with an XT3
4U server, and how the BNC connectors should be cabled:
IN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4
#REC
SLSM
6x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 1 PLAY1 MIX1 REC
1,3 REC
1,6 REC
1,2 REC
1,5 REC
1,1 REC
1,4
Example: 1xSLSM 6PH + 1 PLAY MIX
The BNC connectors to be used as record and play channels in an SLSM configuration
with 1xSLSM 6PH + 1 PLAY MIX need to be cabled as shown below:
XT3 6U Servers
Available Configurations with SLSM 2-Phase Cameras
IN6/OUT1 IN5/OUT2 IN4/OUT3 IN3/OUT4 IN2/OUT5 IN1/OUT6
#REC
SLSM
2x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 0 REC
1,2 REC
1,1
1 1 0 REC
2 REC
1,2 REC
1,1
1 2 0 REC
3 REC
2 REC
1,2 REC
1,1
XT3 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 72