EVS XT3 Version 11.01 - November 2012 Configuration Manual - Manual (Page 182)

3.7.4. Sony BVW Settings
Introduction
The Sony BVW settings allow specifying the settings that will be used with the Sony
BVW75 protocol.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Protocol tab, on page 1 in the basic and
advanced display mode in the server- and web-based interfaces.
• in the Technical menu of the Remote Control Panel (T5.X).
Warning
The Sony BVW settings are only available if the license code 118, required to
work with the Sony protocol, is valid.
The following screenshot presents page 1 of the Protocol tab in the server-based
application and highlights the Sony BVW settings area.
FFW/REW speed
Description Specifies the speed used by the protocol for forward and
rewind operations.
Values 2 to 50 times the normal speed
Default value 50
XT3 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 172