AASTRA 6757i User Guide EN - Manual (Page 80)

Line Keys and Softkeys
73
41-001385-00 Rev 01 – 06.2013
Configuring a BLF/List Key
The BLF List function can be configured on the 6757i using the Aastra Web UI only.
If you set a key to use BLF/List, you must also enter a BLF List URI at Operation->Softkeys and XML->Services. The BLF
List URI is the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user.
For example, sip:[email protected]. The value of the BLF/List URI parameter must match the list name configured. Other-
wise, no values display on the 6757i screen and the feature is disabled.
Use the following procedure to set a key to function as "BLF/List". The procedure shows the softkey screens as an exam-
ple.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module .
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select "BLF/List" (BroadSoft BroadWorks).