beautypg.com

Message waiting indicator, Configuring message waiting indicator, Additional features – AASTRA 6757i User Guide EN User Manual

Page 183

background image

Additional Features

41-001385-00 Rev 01 – 06.2013

176

Message Waiting Indicator

You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For example, if you
configure the MWI LED on line 3 only, the LED illuminates if a voice mail is pending on line 3. If you configure the MWI LED
for all lines, the LED illuminates if a voice mail is pending on any line on the phone (lines 1 through 9).

You configure the MWI indicator using the Aastra Web UI.

Configuring Message Waiting Indicator

Use the following procedure to configure the message waiting indicator on a specific line or on all lines on the IP phone

Aastra Web UI

Note:

"Message Waiting Indicator Line" parameter is set to ALL lines by default.

1.

Click on Basic Settings->Preferences->General.

2.

The "Message Waiting Indicator Line" field is set to ALL lines by default. If required, change the setting to a specific
line by selecting a line from the list. Valid values are All and lines 1 through 9.

3.

Click Save Settings.