AASTRA 6757i User Guide EN - Manual (Page 159)

Managing Calls
41-001385-00 Rev 01 – 06.2013
152
8. Click on Basic Settings->Preferences->General.
9. In the “Call Forward Key Mode” field, select a call forward mode to use on the phone. Valid values are: Account,
Phone, Custom. Default is Account.
• Account - (default) The account mode allows you to configure CFWD on a per account basis. Pressing a con-
figured CFWD key applies to the account in focus.
• Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or
No Answer). When you configure the initial account, the phone applies the configuration to all other accounts.
(In the Aastra Web UI, only the account you configured is enabled. All other accounts are grayed out but set
to the same configuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes
apply to all accounts on the phone.
• Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can
configure a specific state (All, Busy, and/or No Answer) for each account independently or all accounts. On
the 6757i, you can set all accounts to All On, All Off, or copy the configuration for the account in focus to all
other accounts using a CopytoAll softkey.
Note:
If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves
as if the mode was set to “Phone”.
10. Click Save Settings.
The changes takes affect immediately without a reboot.