AASTRA 6757i User Guide EN - Manual (Page 113)

Line Keys and Softkeys
41-001385-00 Rev 01 – 06.2013
106
Configuring a Callers List Key
Use the following procedure to configure a Callers List key on the 6757i IP Phone. The procedure shows the top softkeys
screen as an example.
!!!DO NOT USE!!! (Paragraph seperator)Expansion Module Keys
Aastra Web UI
Note:
By default, the Callers List key is Key 3 on the Top Softkeys.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module .
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select Callers List.
4. In the "Label" field, enter a label to apply to this key.
5. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
6. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
7. In the "Type" field, select Callers List.
8. (M675i) In the "Label" field, enter a label to apply to this key.
9. Click Save Settings.