Garmin APOLLO GX65 - Manual (Page 286)

Nearest Frequency
The frequency list for the last Nearest Airport viewed
will be available in the Comm function when you
press
RCL. If a diamond appears on the right, turn the
SMALL knob to view more frequencies.
INFO Frequency
You may view up to 15 frequencies for the last airport
viewed using the Info function. If a diamond appears
on the right, turn the
SMALL knob to view more
frequencies.
While viewing the frequencies for an airport after
pressing
INFO , note that the three center smart keys
change to show the displayed frequency types. Press
the smart key for the frequency type to load it into the
Standby frequency.
Destination, TO, and FROM Frequencies
You can access up to 15 airport frequencies referenced
to your TO and FROM waypoints. Turn the
SMALL
knob to view the frequencies. Press the internal or
external
FLIP/FLOP key to load the displayed
frequency into the Active frequency. Press the ENTER
key to load it into the Standby frequency.
Auto Stored Frequencies (Auto)
The GX60/65 keeps track of the last ten Active
frequencies and stores them in a stack. When a new
frequency is used, it becomes number one on the
stack and the old number ten frequency is removed.
Each time a new Active frequency is used, the last
(tenth) frequency is automatically dropped off the list.
Duplicate frequencies are not stored; one instance of
the selected frequency becomes Freq 1 on the list.
10-6
Comm Radio Operation
TWR UNI ATI MSG COM
BOI ATIS 123.90
a162.40 s123.90
UNIC 122.95
TWR 118.10