beautypg.com

Manually selecting a flight plan leg 9-19, Manual leg select 9-19, Manually selecting a flight plan leg -19 – Garmin APOLLO GX65 User Manual

Page 209

background image

suspends leg-sequencing at that waypoint and lights
the OBS/HLD annunciator.

Subsequent pressing of

DIRECT-TO

toggles between

the waypoint selection and OBS DTK choices.

Manually

Selecting a

Flight plan

Leg

Approach operations often result in the need to
manually select a leg of the active flight plan. Manual
leg selection will often be required when operating
with Radar vectors and there is the need to intercept
an approach course. It may also occur when flying a
DME-ARC to intercept an approach course. You
cannot manually select a DME-ARC as a flight plan
leg.

1. Press

FPL

to reach the active leg of your flight plan.

Then, turn the

SMALL

knob to display the desired

leg.

LGD

to

BKE

2** 146° 28.2nm

arpt

iaf

2. Press

ENTER

.

LGD

to

BKE

Press ENTER

to Activate leg

3. Press

ENTER

to accept the displayed destination

waypoint. The unit will then go to NAV mode.

9-19

Approach Basics (GX50/60)

FPL

ENTER

ENTER

This manual is related to the following products: