Getting started 2-1, Power on 2-1, Select a waypoint 2-1 – Garmin APOLLO GX65 User Manual
Page 27: Finding a waypoint by name 2-1, Current time 2-1, Find waypoint 2-1, 2-6, Power up 2-1, Select a waypoint 2-1, 2-3, Selection 2-1, Getting started -1
Getting Started
This section explains how to get started using your
Apollo GX. Information in this section explains how
to:
·
Select a waypoint
·
Store waypoints
·
Find a Nearest Waypoint
·
Fly Direct-To a waypoint
·
Create a flight plan
·
Activate a flight plan
·
Use the Moving Map
It is necessary to enter a seed position and the current
time the first time you turn the unit on. This should
have been done when your unit was installed. So, you
won’t have to set it again unless the unit has been
moved several hundred miles with the power off.
Power On
Turn the Power knob clockwise to switch the unit on.
The startup screen, testing, position, and database
information shows on the display for several seconds
and then will go into the Navigation function.
Select a
Waypoint
You can search for a waypoint character by character,
sort through the database by selecting the first few
characters of the identifier to simplify the search, or
look at every waypoint in order. You can search for
waypoints by identifier or the city/facility name.
Finding a waypoint by name
1. Press the
DB
smart key. Turn the
LARGE
knob to
display the Access Database page. Press
ENTER
.
Access Database
Press ENTER
Getting Started
2-1
DB
ENTER