Garmin APOLLO GX65 - Manual (Page 243)

2. Now press DIRECT-TO twice. Turn the LARGE
knob to reach the reference waypoint. Turn the
SMALL knob to select BO.
OBS DTK: 150° to
BO mahp man
brg 162 dtk 162
3. Turn the LARGE knob to select the OBS course.
Select 105° with the SMALL knob as the desired
inbound course. Press ENTER . The CDI will
indicate FROM and will provide guidance on the 105°
outbound bearing as per missed approach
instructions. At 3900’, begin the climbing right turn.
OBS DTK: 105° to
BO mahp man
brg 162 dtk 162
4. When you reach 4200’, or when your bearing to BO
matches your current heading, press DIRECT-TO
and then ENTER . This will establish a new inbound
course direct to BO.
BO NDB
USTIK (BOISE)
facil ID USA
Point D (Inbound to BO)
Fly inbound on the new direct course to BO. The
OBS/HLD annunciator will remain lighted.
Point E (Missed Approach Hold Point)
As you pass BO, establish the new inbound holding
course and enter the hold. When prompted, select an
OBS DTK of 098° with the
LARGE and SMALL knobs.
Press ENTER .
Note
Reshoot the approach following your
missed approach, by reactivating the flight
plan leg from PARMO (IAF) to BO
(FAF)
or select DIRECT-TO PARMO (IAF).
9-53
Approach Examples
D
ENTER
D
ENTER
D
ENTER
ENTER