Garmin APOLLO GX65 - Manual (Page 252)

Manually select the leg from BTG to OLM (which is
V287). Even though you have not yet reached BTG,
you will know when you have intercepted this course.
1. Press FPL twice to reach the active plan in Flight
Plan Mode. This example uses a flight plan from
the Salem (SLE) airport to the Battle Ground
(BTG) VOR and then to the Olympia (OLM)
VOR. Turn the
SMALL knob clockwise one click to
view the first leg of your flight plan.
Note that on the second line of each leg page, a
number appears to indicate the leg number. An
Asterisk is used after the number of each leg to
indicate the active flight plan.
SLE to BTG
1** 001° 53.2nm
arpt vor
Two asterisks after the leg number indicate the active
leg of the active flight plan (SLE to BTG).
BTG to OLM
2* 331° 74.4nm
vor vor
2. Turn the SMALL knob until the leg you wish to
activate is shown and then press ENTER twice.
3. Now fly the ATC assigned heading of 360 until the
CDI centers to indicate that we have intercepted
V287.
9-62
Approach Examples
ENTER
ENTER
FPL
FPL