Procedure turns 9-21, Procedure turns 9-21 - 9-22, 9-66, 9-68, Procedure turns -21 – Garmin APOLLO GX65 User Manual
Page 211
Procedure
Turns
A procedure turn is a way of crossing the same
waypoint more than once in order to accomplish a
course reversal. First, make sure that flight plan leg
sequencing is suspended. Second, after crossing the
waypoint, set the correct inbound course to intercept.
Finally, enable sequencing when you are established
inbound.
Suspend Sequencing
When a procedure turn or course reversal is required,
press
OBS/HOLD
to
suspend
sequencing.
The
OBS/HLD annunciator will light. In the cases shown
in the diagram below, the Apollo GX will know when
a course reversal is required and will automatically
suspend sequencing.
Set Inbound Course
1. Upon crossing the waypoint you will be prompted
to set the OBS course. Press
ENTER
to reach the
OBS desired track page.
Press ENTER to
set OBS Course;
NAV/MAP to exit
9-21
Approach Basics (GX50/60)
ENTER
IAF
FAF
MAP
Entry at IFAF (Combined) or FAF
If the angle is <70º, then
press HOLD manually.
º, then
HOLD is automatic.
If the angle is >70
Entry at IAF
Press HOLD manually.
IFAF/FAF
MAP
Angle