Garmin APOLLO GX65 - Manual (Page 126)

Update
User
Waypoint
The Update User Waypoint function allows you to
change the position of an existing User waypoint to
your present position.
1. In the Database function, turn the LARGE knob to
“Update User Wpt With Ppos.” Then, press
ENTER .
Update Usert Wpt
With Ppos
Press ENTER
2. A list of the User waypoints is available. The User
waypoint ID will flash. Turn the SMALL knob to
display the desired waypoint and then press ENTER .
Find Wpt to set
#000 user
Press ENTER
Datacard The datacard contains all of the waypoint information
except what is added by the user. The information
contained in the datacard is updated on a regular
basis. Contact the factory for obtaining new datacards
for the appropriate coverage and time period. C129
operations require using the latest information.
Remove the datacard by pressing the ejector button
located to the right of the datacard. Insert the datacard
by pushing it completely into the slot. Follow the
directions on the card for proper orientation.
RNAV
Waypoints
Intersections associated with RNAV approaches can
be found by loading the approach in which they
occur. They may not be contained in the “INT (K)”
files of the database.
Should you be required to
navigate to one of these intersections, you must first
load the associated approach and then initiate a
“Direct To” to that waypoint in Flight Plan mode.
5-16
Waypoint Database
ENTER
ENTER