Garmin APOLLO GX65 - Manual (Page 185)

Outside Hold Altitude Buffer
You have gone above or below the selected Hold
Altitude Buffer.
Altitude Alert
500ft Above
Hold Altitude
Start Auto Descent
Begin Descent
To NOONS
500ft/min 130kts
Arrival At Auto Descent Altitude
Arrival At
2000ft Target
Descent Altitude
Arrival At The TO Waypoint
The arrival message is generated when you are within
36 seconds of arrival at the current TO waypoint,
except when turn anticipation is active. The arrival
message is cleared after viewing it; it does not become
an old message after viewing. The arrival condition
will also go away without viewing the message after
crossing the angle bisector. In the example below,
WPT 2 is the TO waypoint. When the aircraft crosses
the dotted line, WPT 3 will become the TO waypoint.
This form of the Arrival Alert is provided when not
holding at the current TO waypoint. When flying an
approach DME Arc, then waypoint is automatically
placed on hold. The hold is automatically removed
upon arriving at the TO waypoint, prior to receiving
the arrival alert.
8-9
Message Function