Garmin APOLLO GX65 - Manual (Page 281)

Comm Radio Operation
This section introduces the basic operating details of
the VHF Communications Transceiver portion of the
Apollo
GX60/65. The Comm information is
displayed in the bottom row of the display: Active (A)
and Standby (S) frequencies. The Active (A) indicator
changes to “Tx” when you are transmitting. The
Standby (S) indicator changes to an “m” when the
monitor function is used. The Smart keys will change
when you press the
COM key to add the Monitor
(MON), Recall (RCL), Memory (MEM), and
Flip/Flop
(<->) functions. The Standby (S)
frequency is reversed when Comm Radio operation is
selected.
Power
On/Off
Turn the Power/Volume control clockwise past the
OFF detent.
Volume Turn the Power/Volume control clockwise to
increase the volume level and counterclockwise to
decrease volume.
SMALL and LARGE Knobs
The dual concentric knobs on the right side of the
GX60/65 are used to select frequencies or other
options. The
LARGE outer knob is used to change the
MHz value in 1 MHz steps.
The
SMALL inner knob changes the kHz values in 25
kHz steps.
The LARGE and SMALL knobs are used to view
different functions and for editing. Other functions
will be described in the affected section.
Comm Radio Operation
10-1
MEM RCL MON MSG
ete SLE 01:23
1.006
Brg 126 123nm
a119.10 s118.75
һ
±
< >
Monitor Recall Memory Flip/Flop
Active
Frequency
Standby
Frequency