Garmin G1000 Socata TBM 850 - Manual (Page 79)

190-00709-02 Rev. B Garmin G1000 Pilot’s Guide for the Socata TBM 850 65
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
If the same VOR/LOC navigation source is selected on both PFDs, the navigation source annunciation turns
yellow on both displays (unless synchronized). Once the CDIs are synchronized (CDI Synchronization turned
on), they remain synchronized until the setting is changed. When turning on the G1000 for use, the system
remembers the last CDI synchronization setting.
Synchronizing the CDIs:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor. Time Format is highlighted.
3) Turn the large FMS Knob to highlight the CDI Sync ON/OFF field.
4) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
5) Press the FMS Knob to remove the cursor.
Figure 2-26 CDI Sync Setting
(AUX - System Setup Page)