Garmin G1000 Socata TBM 850 - Manual (Page 509)

Garmin G1000 Pilot’s Guide for the Socata TBM 850 190-00709-02 Rev. B 495
ADDITIONAL FEATURES
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
CHARTVIEW CYCLE NUMbER AND EXPIRATION DATE
The ChartView database is revised every 14 days. Charts are still viewable during a period that extends from
the cycle expiration date to the disables date. ChartView is disabled 70 days after the expiration date and is no
longer available for viewing upon reaching the disables date. When turning on the G1000, the Power-up Page
indicates any of nine different possible criteria for ChartView availability. See the table below for the various
ChartView Power-up Page displays and the definition of each.
Power-up Page Display Definition
Blank Line. G1000 system is not configured for ChartView. Contact
a Garmin-authorized service center for configuration.
System is configured for ChartView but no chart database is
installed. Contact Jeppesen for a ChartView database.
Normal operation. ChartView database is valid and within current
cycle.
ChartView database is within 1 week after expiration date. A new
cycle is available for update.
ChartView database is beyond 1 week after expiration date, but still
within the 70 day viewing period.
ChartView database has timed out. Database is beyond 70 days
after expiration date. ChartView database is no longer available for
viewing.
System time is not available. GPS satellite data is unknown or
G1000 has not yet locked onto satellites. Check database cycle
number for effectivity.
System is verifying chart database when new cycle is installed for the
first time.
After verifying, chart database is found to be corrupt. ChartView is
not available.
Table 8-1 ChartView Power-up Page Annunciations and Definitions