Hazard avoidance – Garmin G1000 Socata TBM 850 User Manual
Page 410
Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-02 Rev. B
396
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
The traffic mode is annunciated in the upper left corner of the Traffic Map Page. When the aircraft is on the
ground, TIS automatically enters Standby Mode. If traffic is selected for display on another map while Standby
Mode is selected, the traffic display enabled icon is crossed out (also the case whenever TIS has failed). Once
the aircraft is airborne, TIS switches to Operating Mode and traffic information is displayed. The mode can be
changed manually using softkeys or the page menu.
Mode
Traffic Mode Annunciation
(Traffic Map Page)
Traffic Display Enabled Icon
(Other Maps)
TIS Operating
OPERATING
TIS Standby
STANDBY
(also shown in white in center of page)
TIS Failed*
FAIL
* See Table 6-18 for additional failure annunciations
Table 6-17 TIS Modes
Switching between TIS modes:
1)
Select the Traffic Map Page.
2)
Select the STANDBY or OPERATE Softkey to switch between modes. The mode is displayed in the upper left
corner of the Traffic Map Page.
Or
:
a)
Press the MENU Key.
b)
Select ‘Operate Mode’ or ‘Standby Mode’ (choice dependent on current state) and press the ENT Key.