Actron AutoScanner® Plus CP9580A - Manual (Page 83)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 27
Diagnostic Menu
4
✓
Two types of Drive Cycle Monitors are:
❒ SINCE DTCs CLEARED shows status of the monitors since the
Diagnostic Trouble Codes were last erased.
❒ THIS DRIVE CYCLE shows status of monitors since start of
current drive cycle. Refer to the vehicle service manual for more
detailed information on emission-related monitors and their status.
✓
=====================
Since DTCs Cleared
This Drive Cycle
Drive Cycle Monitor
This Drive Cycle
Some vehicles DO NOT support
Drive Cycle Monitors. If vehicle
supports both types of Drive Cycle
Monitors the Menu will display.
2.View Summary of Monitor Status.
•Use UP or DOWN arrow key (if required).
3.Depending on the Drive Cycle Monitors one of these 2 screens
will be present.
=====================
Catalyst Mon
inc
Htd Catalyst inc
Evap System Mon inc
Since DTCs Cleared
=====================
Catalyst Mon
inc
Htd Catalyst inc
Evap System Mon inc
This Drive Cycle
OR
✓
The Scan Tool display is continuously updated. Monitors that are “ok”
will disappear and only the “inc” monitors will remain displayed.
Monitors designated “n/a” are not displayed.