Actron AutoScanner® Plus CP9580A - Manual (Page 29)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 5
Using The Scan Tool
3
Vehicle Power
When the Scan Tool is connected to the
vehicle’s DLC, the tool is powered by the
vehicle and will automatically turn on once
connected.
USB Power
When the tool is connected to a Personal Computer (PC) via the USB
cable, the tool will automatically power up.
✓
Refer to Scan Tool Does Not Power Up in Section 5
Troubleshooting
if there are problems.
System Setup
✓
System Setup allows:
❒ Measurement units to be changed.
❒ Display contrast to be changed.
❒ Auto-Power off time to be changed.
❒ Print Header to be turned ON or OFF.
❒ Scan Tool information to be viewed.
❒ Display to be checked.
❒ Operation of the keypad to be checked.
❒ Memory of the tool to be checked.
❒ Scan Tool to be upgraded.
❒ Language to be changed.
❒ Quick Test to be turned ON or OFF.
❒ Long PID names to be turned ON or OFF.
Diagnostic
Connector