Actron AutoScanner® Plus CP9580A - Manual (Page 63)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 7
Diagnostic Menu
4
Read Codes
✓
The Read Codes function allows the Scan Tool to read the DTCs from
the vehicle’s control modules. DTCs are used to help determine the
cause of a problem or problems with a vehicle. These codes cause the
control module to illuminate the malfunction indicator lamp (MIL)
when emission-related or driveability fault occurs. MIL is also known
as service engine soon or check engine lamp.
✓
Read Codes can be done with the key on engine off (KOEO) or with
the key on engine running (KOER).
From Diagnostic Menu:
1.
=====================
I/M Monitors
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Diagnostic Menu
Read Codes
Select Read Codes.
•Use
UP or DOWN
arrow key until Read Codes is
highlighted.
•Press ENTER.
2.
=====================
Global OBD II
ABS
Transmission
Engine
Select Module
OBD II/EOBD
If more than one module is
supported, a menu is
displayed.
•Use UP or DOWN
arrow key until desired choice
is highlighted.
•Press ENTER.