Actron AutoScanner® Plus CP9580A - Manual (Page 64)

Diagnostic Menu
4 – 8 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
✓
If no DTCs are present a
message stating System Pass:
No Faults Detected is displayed.
=====================
System Pass
No faults detected.
Read Codes
✓
If you selected All of the Above
from the Select Module menu,
then all of the codes will be
displayed as if you picked all
menu items individually.
3.View and write down the DTCs.
•Use the UP or DOWN arrow keys.
❒
DTC X of Y
Number Module
DTC Descri ption
DTC Type
The screen at the right shows
where the Read Codes
information is located.
DTC Number - number of the trouble code found in vehicle service
information.
X of Y - Indication that you are viewing code x of y, where x is the code
being viewed of the total y.
Module - This field is where the name of the module (e.g. ABS) or
address of the module (e.g. Mod $28) or both are shown (ABS $28). The
table below describes modules supported.