Actron AutoScanner® Plus CP9580A - Manual (Page 38)

Using The Scan Tool
3 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
Display Test
The Display Test is used to check the display.
✓
The test fills every pixel of the display with a solid black character.
From System Setup menu:
1.Select
Display Test.
•Use UP or
DOWN
arrow key until Display Test is
highlighted.
2. Start
Display Test.
•Press
ENTER
.
3. Look for Missing Spots.
• All characters display in solid black if there are no concerns.
• Screen flips back and forth between screens shown below.
4. When Done, Press BACK Key.
=====================
Language Setup
Long PID Names
Tool Information
Display Test
Keypad Test
Memory Test
System Setup
Display Test
Check for missing
spots in display
Press BACK To exit
=====================
Display Test