Actron AutoScanner® Plus CP9580A - Manual (Page 74)

Diagnostic Menu
4 – 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
2.
PID X / Y
Please Wait
Validating PIDs
Observe while Scan Tool
validates PID MAP.
✓
PID MAP validation is the tool asking the vehicle which PIDs are
supported. See Appendix A for a complete list of PIDs supported by
the tool.
✓
Multiple PIDs may be sent if vehicle is equipped with more than one
computer module (for example a powertrain control module [PCM]
and a transmission control module [TCM]). The Scan Tool identifies
them by their identification names (ID) assigned by manufacturer (i.e.
$10 or $1A).
✓
If one or more control module stops responding, the Scan Tool
displays a message.
❒ If continuing, dashes will replace data in right hand column.
❒ If no is selected, then the Scan Tool attempts to re-establish
communication with that module.
View Entire List.
✓
View Entire List shows all supported PID data for the vehicle being
tested.
From Select Data to View menu:
1.
=====================
Entire Data List
Custom Data List
Long PID Names
Select Data to View
Entire Data List
English / Metric
Select Entire Data List.
•Use UP or DOWN
arrow key until Entire Data
List is highlighted.
•Press ENTER.