Set antenna field – ACS ACR1283L User Manual
Page 41
ACR1283L – Reference Manual
Version 1.00
www.acs.com.hk
Page 41 of 55
5.4.10. Set Antenna Field
This command is used for turning on/off the antenna field.
Antenna Field Control Format (6 Bytes)
Command
Class
INS
P1
P2
Lc
Data In
Antenna Field
Control
0xE0h
0x00h
0x00h 0x25h
0x01h
Status
Antenna Field Control Response Format (6 Bytes)
Response
Class
INS
P1
P2
Le
Data Out
Result
0xE1h
0x00h
0x00h
0x00h
0x01h
Status
Where:
Status (1 Byte): 0x01h = Enable Antenna Field
0x00h = Disable Antenna Field
Note: Make sure the Auto PICC Polling is disabled before turning off the antenna field.