ACS ACR1283L - Manual (Page 37)

ACR1283L – Reference Manual [email protected]
Version 1.00 www.acs.com.hk
Page 37 of 55
5.4.6. Set the PICC Operating Parameter
This command is used to set the PICC operating parameter.
Set the PICC Operating Parameter Format (6 Bytes)
Command Class INS P1 P2 Lc Data In
Set the PICC
Operating Parameter
0xE0h 0x00h 0x00h 0x20h 0x01h
Operation
Parameter
Set the PICC Operating Parameter Response Format (6 Bytes)
Response Class INS P1 P2 Le Data Out
Result 0xE1h 0x00h 0x00h 0x00h 0x01h
Operation
Parameter
Operating Parameter (1 Byte)
Operating
Parameter
Parameter Description Option
Bit0 ISO 14443 Type A
The Tag Types to be
detected during PICC Polling.
1 = Detect
0 = Skip
Bit1 ISO 14443 Type B
1 = Detect
0 = Skip
Bit2 - 7 RFU RFU RFU
Note: Default value of Operation Parameter = 0x03h