ACS ACR1283L - Manual (Page 26)

ACR1283L – Reference Manual [email protected]
Version 1.00 www.acs.com.hk
Page 26 of 55
• Maximum 48 bytes for Mifare 1K (Multiple Blocks Mode; 3 consecutive blocks)
• Maximum 240 bytes for Mifare 4K (Multiple Blocks Mode; 15 consecutive blocks)
Example 1: 0x10h (16 bytes). The starting block only. (Single Block Mode)
Example 2: 0x30h (48 bytes). From the starting block to starting block+2. (Multiple Blocks Mode)
Note: For safety reason, the Multiple Block Mode is used for accessing Data Blocks only. The
Trailer Block is not supposed to be accessed in Multiple Blocks Mode. Please use Single Block
Mode to access the Trailer Block.
Block Data (Multiply of 16 + 2 Bytes, or 6 bytes): The data to be written into the binary
block/blocks.
Update Binary Block Response Codes (2 Bytes)
Results SW1 SW2 Meaning
Success 90 00h The operation is completed successfully.
Error 63 00h The operation is failed.
Examples:
// Update the binary block
0x04h of Mifare 1K/4K with Data {00 01 .. 0Fh}
APDU = {FF D6 00 04 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0Fh}
// Update the binary block
0x04h of Mifare Ultralight with Data {00 01 02 03h}
APDU = {FF D6 00 04 04 00 01 02 03h}
5.3.2.2.5. Value Block Operation (INC, DEC, STORE)
This command is used for manipulating value-based transactions (e.g., increment a value of the value
block etc.).
Value Block Operation APDU Format (10 Bytes)
Command Class INS P1 P2 Lc Data In
Value Block
Operation
FFh D7h 00h
Block
Number
05h VB_OP
VB_Value (4 Bytes)
{MSB .. LSB}
Where:
Block Number (1 Byte): The value block to be manipulated.
VB_OP (1 Byte):
0x00h = Stores the VB_Value into the block. The block will then be
converted to a value block.
0x01h = Increments the value of the value block by the VB_Value.
This command is only valid for value block.
0x02h = Decrements the value of the value block by the VB_Value.
This command is only valid for value block.
VB_Value (4 Bytes): The value used for value manipulation. The value is a signed long