Acroprint TQ600F (software version 4.x and above) User Manual
Page 6
2
1.3 Use of the Touch Screen
Touch the screen with one of your fingertips or the edge of a fingernail, as shown in the following figure. A broad point of
contact may lead to inaccurate pointing.
Note
: A stylus has also been included to facilitate keyboard entry. The stylus telescopes to 3-1/2” by
simultaneously pulling on both ends.
When the touch screen accuracy is off, you can perform a screen calibration through the following menu operations:
Press [Menu] → [Auto Test] → [Calibration] on the screen and a cross icon will be displayed. After you touch the
center of the cross at five locations on the screen correctly, the system will automatically return to the Auto Test menu.
Press [Exit] to return to the Menu screen. For details, see
9. Auto Test
. Smudges or dust on the touch screen may
affect performance. Clean the screen as necessary.
1.4 Touch Operations
•
Enter numbers: Press the [User ID] key. The system will automatically display the keypad screen. After entering
the user ID, press [OK] to save or press [X] to cancel and return to the previous screen.