Acroprint TQ600F (software version 4.x and above) - Manual (Page 37)

33
• Press [Bell] on the Date/Time screen. The displayed bell setting screen lists all the predefined bells.
• Press a bell in the list on the bell setting screen to display the [Edit] screen.
• The following parameters can be configured:
ƒ Bell Time: Used to set time when the device automatically plays a bell ring tone every day.
ƒ Bell Date: Used to set which day the device automatically plays a bell ring tone.
ƒ Ring Tone: Used to set the bell ring tone.
ƒ Repeat: Used to set the alarm times.
ƒ State: Used to disable/enable the bell.
ƒ Bell Type: You can select between internal ringing and external ringing. For internal ringing, the ring tone is
played by the loudspeaker of the device. For external ringing, the ring tone is played by an external electric
bell that is connected with the device.
• To add a bell, press [Add] on the Bell listing screen.
• To delete a bell, press the bell on the Bell listing screen to display the Edit screen and then press [Delete].
8.3 Daylight Savings Time (DLST)
DLST, also called Daylight Savings Time, is a system to prescribe local time in order to save
energy. The unified time adopted during the system date is called “DLST”. Usually, the time will
be moved one hour forward in spring. It can make people sleep early and get up early. It can
also reduce lighting to save power. In autumn, the time will be moved back 1 hour. The
regulations are different in different countries. At present, nearly 110 countries adopt DLST.
To meet the demand of DLST, a special option can be customized on the TQ600F.
Automatically set the time one hour forward at XX (minute) XX (hour) XX (day) XX (month),
and/or one hour backward at XX (minute) XX (hour) XX (day) XX (month) if necessary.