Acroprint TQ600F (software version 4.x and above) User Manual

Page 13

FACE & PW verification:

Users can punch in/out by scanning their face. Once their face has been verified they are prompted to enter their

password. Enter password and press “OK”. If the verification is successful, the display will show a punch in or out.

FACE & RF verification:

Users can punch in/out by scanning their face. Once their face has been verified they are prompted to scan their

proximity badge. Scan badge. If the verification is successful, the display will show a punch in or out. Note that if a

user attempts to punch using a different verification method such as PW they will receive a Verify Mode error even if

they have a password saved in the terminal. Users can only use Face &proximity badge in this verification mode.

PW verification:

Users can punch in/out using their Pin# & Password. Press “1:1” on the Main Interface. Enter User ID (Pin#) and

press the password button (Key icon). Enter password and press “OK”. If the verification is successful, the display

will show a punch in or out. Note that if a user attempts to punch using a different verification method such as Face or

RF they will receive a Verify Mode error even if they have a face template or proximity badge saved in the terminal.

Users can only use password in this verification mode.

RF verification:

Users can punch in/out by scanning their proximity badge. Scan badge. If the verification is successful, the display

will show a punch in or out. Note that if a user attempts to punch using a different verification method such as Face or

PW they will receive a Verify Mode error even if they have a face template or password saved in the terminal. Users

can only use a proximity badge in this verification mode.

FACE verification:

Users can punch in/out by scanning their face. Once their face has been verified, the display will show a punch in or

out. Note that if a user attempts to punch using a different verification method such as PW or RF they will receive a

Verify Mode error even if they have a password or badge saved in the terminal. Users can only use Face in this

verification mode.

PW/RF verification:

Users can punch in/out using their Pin#/Password or proximity badge. Press “1:1” on the Main Interface. Enter User

ID (Pin#) and press the password button (Key icon). Enter password and press “OK”. If the verification is successful,

the display will show a punch in or out.

A user can also scan their proximity badge to punch. Note that if a user attempts to punch using a different verification

method such as Face they will receive a Verify Mode error even if they have a face template saved in the terminal.

Users can only use Pin#/Password or proximity badge in this verification mode.