Acroprint TQ600F (software version 4.x and above) - Manual (Page 36)

32
8. Date/Time Setting
8.1 Set Date/Time
The date and time of the device must be set accurately to ensure the accuracy of attendance
time.
• Press
[Menu] on the initial screen to display the main menu screen.
• Press [Date/Time] to display the Date/Time setting screen.
• Select the desired date and time by pressing the parameter. For the time format, there are
10 formats available. Both 12-hour and 24-hour time systems are supported.
• Press [Save] to save the current information and return to the previous screen. Press
[Exit] to return to the previous screen without saving the current information.
8.2 Bell Setting
Many companies ring bells to signal the start and end of work shifts. They usually manually ring them or use electric
bells. To lower costs and facilitate management, the time bell function has been integrated into the TQ600F. You can
set the alarm time and duration for ringing the bell based on your requirements. The device will then automatically play
the selected ring tone and trigger the relay simultaneously, as well as stop playing the ring tone after the set duration.
Each device is predefined with 15 alarm bells.