Acroprint TQ600F (software version 4.x and above) User Manual
Page 10
6
1.7 Verification Modes
1.7.1 Face Verification
1: N Face Verification
The terminal compares the current face template (image) with all face templates on the terminal.
• Scan your face using the proper technique. For details, see
1.1 Standing Position, Posture and Face Expressions
.
Your image will appear on the display as shown by the figure on the left below.
•
If your face template is matched to a template in the terminal, your face template will be displayed as shown by the
figure on the right below.
1:1 Face Verification
In the 1:1 face verification mode, the device compares your face with the template stored for the user ID you entered.
Use this mode when you are having difficulty verifying your identity. The terminal will only have to compare your face
with one face template.
• Press
[1:1] on the Main Interface screen to enter the 1:1 recognition mode.
•
Enter your User ID, then press the [1:1 Face] icon to enter 1:1 face recognition mode. If the prompt "Not Registered!" is
displayed, the user ID does not exist.
•
Scan your face using the proper technique. For details, see
1.1 Standing Position, Posture and Face Expressions
.
• If the verification is successful, the device will display "Verified". The system will return to the Main Interface if the
verification is not made within 20 seconds.