Acroprint TQ600F (software version 4.x and above) User Manual
Page 11
7
1.7.2 Password Verification
In the password verification mode, the device compares the password entered with the password assigned to the user
ID.
• Press
[1:1] on the Main Interface to enter the 1:1 recognition mode.
• Enter the user ID and then press the "Key” icon to enter the password verification mode. If the prompt “Not
Registered!” is displayed, the user ID does not exist.
•
Enter the password and press the “OK” icon to start the password comparison.
•
If the verification is successful, the device will display “Verified”, otherwise the device will prompt “Verify fail” and
return to password input screen.
1.7.3 Proximity Badge Verification
The TQ600F supports the following proximity badge verification modes: Badge Only, Badge + Facial Verification,
and Badge + Password.
Badge Only
•
Swipe your badge over the swipe area. For details on locating the swipe area, see
1.5 Appearance of Device
.
•
If the verification is successful, the device will display “Verified”.
•
If the verification is not successful, the device will display “Not Enrolled”.