Acroprint TQ600F (software version 4.x and above) User Manual
Page 27
23
6.4 Log Settings
•
Log Alert: When the available space is insufficient to store the specified number of attendance records, the
device will automatically generate an alarm (Valid values: 1-99).
•
Dup. Punch Period (m): If a user’s attendance record already exists and the user punches in again within the
specified period (unit: minute), the second attendance record will not be stored (Valid values: 1-60 minutes).
•
Card Only: If this parameter is set to “YES”, users can punch by only using a badge. If this parameter is set to
“NO”, you will need to verify your face after badge verification.
•
Workcode Mode: The default value is “None”; only mode 3 and mode 4 are supported by the timeQplus software.
•
Face detect interval: The default value is 0, i.e., there is no interval.
6.5 Shortcut Definitions
You can define the following touch screen functional shortcut keys: Status, WorkCode, and SMS.
6.5.1 Set Shortcut Keys
• Press
Shortcut Def. to display the list of the existing shortcut keys; press the shortcut key to be modified. On the
edit screen, press Function. On the Function screen, select the desired shortcut function.