Acroprint TQ600F (software version 4.x and above) - Manual (Page 19)

15
• After the password is entered, a screen is displayed as shown to the right . Press [Save] to save the current
information and return to the previous screen. Press [Exit] to return to the previous screen without saving the
current information.
3.4 Enrolling Proximity Badges
• Press [Card] on the Add User screen to display the Enroll Card screen.
• The Punch Card! Screen displays as shown below. Swipe your badge over the swipe area. For
details on locating the swipe area, see 1.5 Appearance of Device .
• If the badge passes the verification, the device will display a prompt message “Read Successfully!
Card No.: **********”, and return to the Add User screen.
• Press [Save] to save the current information and return to the previous screen. Press [Exit]
to return to the previous screen without saving the current information.
3.5 Enrolling a Face
• Press [Face] on the Add User screen to display the face enrollment screen.
• On the displayed face enrollment screen, turn your head to the left and right slightly, raise and lower your head
according to the voice prompts, so as to enroll different parts of your face into the system. See 1.2 Enrollment
Face Expressions .