Acroprint TQ600F (software version 4.x and above) User Manual
Page 28
24
•
To configure the Status function, press Status on the Function screen. The Edit screen will appear, allowing the
user to configure individual settings for the Status shortcut. Press the Label box to enter the Label screen. Press
the row of the label (six options for Status) to select it.
• The
Code cannot be modified; it is changed accordingly with the selected label for the status key. Select Auto
Switch, and select “On”, as shown in the figures below.
• Press
Define to enter the time setting screen. Press the key on the touch screen to set the time; press [OK] to
save and return to the edit screen.
•
After the setting is completed, press [Save] to save the setting and return to the Shortcut Def. screen.
Note
: The shortcut function “Status” is currently NOT supported by the timeQplus software.
6.5.2 How to Use the Workcode Shortcut Key
• Press on the initial screen to display the assigned function keys.
• Press
[Workcode]. “Verify” will be displayed on the screen.
•
Proceed with face/card/password verification. After successful verfication, a list
of assigned work codes will be presented to the user.
•
Press a work code to select it. User will then be punched in.