Acroprint ATR360 Top Loading Time Card Recorder with Fingerprint & Proximity Badge User Verification - Manual (Page 4)

Page 1 of 26
Before You Start!
What’s In the Box
• ATR360
Time Recorder
• (2) Clock Cover Keys
• 18vDC Switching Power Supply
• User
Manual
• (25) Sample ATR241 Weekly Time Cards
• (5) Sample Proximity Badges
• Clock
Wall Mounting Template
(Also available for download at http://support.acroprint.com)
• (2) Mounting Screws
• (2) Plastic Wall Anchors
1) Unpack clock. Inspect clock for any damages that may have occurred during
shipment. Check box contents for any missing items. If any damages are
found or if any parts are missing please
contact Acroprint Customer Service at
(800) 334-7190.
2) Open clock cover and remove the plastic battery insulators. Pull the insulators
straight up with a slow and steady motion to avoid tearing them. If an insulator
is torn it will prevent the battery from making contact. If this happens contact
Acroprint Customer Service at (800) 334-7190.
3) Connect the ATR360 power adapter and plug it into a wall outlet to turn the clock
on.
Do not attempt to service the ATR360 yourself. Disassembling the clock will
void the warranty. Always follow the instructions in the user guide.
• Do not place the clock in direct sunlight. Bright light may significantly affect
fingerprint reads or cause fingerprint verification to fail.
• The clock is designed for indoor use in a temperature range of 32-104º F (0-40º C).
The clock is not waterproof or shockproof. Keep the clock away from heat
sources such as radiators. Avoid dusty environments or exposure to chemicals.
• The clock may be placed upright on a solid surface or mounted to a wall with
mounting screws. Use the enclosed template & screws for wall mounting.
Avoid locations where the device will be susceptible to vibrations and shock, such
as a slamming door.
• The terminal warranty does not cover defects or damages arising from improper
installation, improper storage, abuse, or unauthorized service.