Acroprint ATR360 Top Loading Time Card Recorder with Fingerprint & Proximity Badge User Verification - Manual (Page 15)

Page 12 of 26
Using a Badge to Clock Out
1. When clocking out P2, P4 or P5 must be selected
2. Insert the time card with the current week facing you and the card in the upright
position
3. Scan the badge by placing it in front of the badge scanner, if the badge is
accepted the time card will automatically feed into the time clock and print the
correct time
4. Remove the time card
Features and Specifications
Clock Features:
User Authentication Method Fingerprint or Proximity Badge
Display Language English
Operation Mode Stand-alone (No PC Interface)
Proximity Card Reader EM
Operational Battery Backup Optional
Auto Card Feeder Yes
Printing Method 9-Pin Dot Matrix
Eliminates Buddy Punching Yes
Two Color Printing Yes
Perpetual Calendar Yes
Auto Fix Positioning Yes
Power Failure Printing Yes
Power Failure Memory Retention Yes
Display Format 12 or 24 hour
Print Format 12 hr, 24 hr, decimal time
External Alarm Connection Available
Auto Column Changing Yes
Compatible with Wkly Time Card Yes (Card Recognition Off)
Card Recognition (front/back) Yes
Clock Specifications:
Fingerprint Recognition
Effective FP Detection Area 16 x 14 mm
Average Recognition Speed 1.2 sec
FRR ≤0.01%
FAR ≤0.0001%
Fingerprint Verification 1:N
Fingerprint Placement Angle 360º
Fingerprint Template Capacity 150