Acroprint ATR360 Top Loading Time Card Recorder with Fingerprint & Proximity Badge User Verification - Manual (Page 10)

Page 7 of 26
Setting Start and End of DST
27. The mode indicator “08” will be flashing, press P5 to switch to mode “09”
28. The mode indicator “09” will be flashing, press P6 to select
29. Press P4 or P5 to select the correct month (US-March)
30. Press P6 to save
31. Press P4 or P5 to select the correct date
32. Press P6 to save
33. Press P4 or P5 to select the correct start time (US-2am)
34. Press P6 to save
35. Complete steps 29-34 to complete the set up for the end of DST
Setting Print Format
36. The mode indicator “10” will be flashing, press P6 to select
37. Press P4 or P5 to select the correct print format
a. 00 – 24 hour (Military Time)
b. 01 – Decimal Hours
c. 02 – 12 hours (pm)
38. Press P6 to save
Setting Time Card Recognition
39. The mode indicator “11” will be Flashing, press P6 to select
40. Press P4 or P5 to select the correct the correct time card format
a. 00 – Monthly, Semi-Monthly
b. 01 – Weekly, Bi-Weekly
41. Press P6 to save
Initial setup is complete. Locate the program switch and move it to the up position.
Replace top cover.